3.2.1，样式如图type as below
3.2.2 规格 dimension
直径Dx长L:2.5mx3m
提供协议草图，a sketch of the fender for the agreement to be provided
3.2.3标准standard
GB/21482-2019，如果本项目规定的要求低于标准，以标准为准.If any requirement is below GB/21482-2019, GB/21482-2019 shall be prevalent.
3.2.4供货方式Supply method
接受放气供货No air supply shall be accepted.
3.2.5连接配套connection matching
转环组及卸扣热浸锌，swivels and shackles to be galvanized
3.2.6 所有的绑扎件热浸锌all lashing pieces to be galvanized
3.2.7 螺栓螺母SUS316， bolts and nuts SUS316
3.2.8工厂施工惯例作为协议的一部分提供 Construction practice to be a part of the agreement
3.2.9一套必要的充气接口与工具及一个存放这套工具的工具箱 a set of air charging nozzles,tools and a tool box.
3.2.10 工厂名牌SUS316，manufacturer name plate SUS316
3.2.11GB/21482-2019第8节要求的标志信息，油漆标志可以接受the marks are to be complied with the requirement of GB/21482-2019 chapter 8,paint marks are to be accepted.
